Double Ridge 1/4 Wavelength Spacer (Shim) & Double Ridge Customized Spacer (Shim)
1. Double Ridge 1/4 Wavelength Spacer(Shim) (Table 1)
2. Double Ridge Customized Spacer(Shim) (Table 2)

1. Double Ridge 1/4 Wavelength Spacer(Shim)
Double Ridge 1/4 Wavelength Spacer(Shim) is mostly used in WG calibration kits. This is also called an offset, or 1/4 Wavelength section. The shim is terminated by the short, fixed load, or the second test port of the analyzer.
|
|
|
1/4 Wavelength Spacer (Shim)
|
Flange |
Material |
P/N |
WRD84 |
0.84-2.0 |
84DRWSPA14 |
FPWRD84D24 |
Al |
WRD200 |
2.0-4.8 |
200DRWSPA14
In Stock! |
FPWRD200D24 |
Al |
WRD250 |
2.6-7.8 |
250DRWSPA14
In Stock! |
FPWRD250D30 |
Al |
WRD350 |
3.5-8.2 |
350DRWSPA14
In Stock! |
FPWRD350D24 |
Al |
WRD475 |
4.75-11.0 |
475DRWSPA14_Cu
In Stock! |
FPWRD475D24 |
Cu |
WRD580 |
5.8-16.0 |
580DRWSPA14_Cu
In Stock!
|
FPWRD580D28 |
Cu |
WRD650 |
6.5-18.0 |
650DRWSPA14_Cu
In Stock!
|
FPWRD650D28 |
Cu |
WRD750 |
7.5-18.0 |
750DRWSPA14_Cu
In Stock!
|
FPWRD750D24 |
Cu |
WRD110 |
11.0-26.5 |
110DRWSPA14_Cu
In Stock! |
FPWRD110C24 |
Cu |
WRD180 |
18.0-40.0 |
180DRWSPA14_Cu
In Stock! |
FPWRD180C24 |
Cu |
2. Double Ridge Customized Spacer(Shim) - MOQ:10pcs
A-INFO manufacturs a wide variety of shims to bridge a gap between two pieces of WG.
Customized spacers(shims) are available.
(XX - thickness,mm)
Pls refer to the Double Ridge Flange Information section for flange type
|